Corsair MP600 NVMe SSDs are a gaming-PC favorite. When a high-speed drive fails or a Flash Voyager USB stops being recognized, we recover the data in our lab.
We handle Corsair SSDs, flash drives — across current and discontinued lines:
MP600MP510Force SeriesFlash Voyager
Common Corsair failures we handle
•An MP600 NVMe not detected
•A Force Series SSD that failed
•A Flash Voyager USB not recognized
•A drive that overheated
Corsair models & families
MP600, MP600 Pro & MP700
PCIe 4.0 and 5.0 NVMe SSDs common in gaming PCs and PS5 upgrades.
MP510 & MP400
NVMe SSDs.
Force Series (MP, LE, GT, 3)
Older SATA SSDs, including SandForce-based models.
Flash Voyager
USB flash drives.
EX100U & EX-series
Portable SSDs.
Known Corsair failure patterns
Widely reported, publicly documented issues we see in Corsair recoveries. Most units never have these problems — but if yours does, here’s what it means for your data.
Early SandForce-based drives
Early SandForce-based Force Series drives (around 2011–2012) were widely reported to disconnect or cause crashes because of firmware issues, addressed by later updates. Surviving drives can still fail into an undetected state.
Sudden NVMe disappearance
Like most SSDs, Corsair NVMe drives usually fail without warning from controller or firmware faults — the data usually remains on the NAND.
Flash drive connectors
A Flash Voyager with a bent or snapped USB connector can often be repaired well enough to read the data, if no one has tried to resolder it.
We email a prepaid label — inbound shipping on us.
3
We recover
Certified engineers work your Corsair device in our ISO cleanroom.
4
Pay on success
Charged only when your data is back.
Corsair recovery — common questions
How much does Corsair data recovery cost?+
One flat $1,200 for the Corsair devices we handle — quoted before you ship, with no per-gigabyte fees and no diagnostic charge. You pay $0 if we can't recover your data.
Can you recover an encrypted or password-protected Corsair drive?+
Often yes, but you'll need the password or encryption key. Many Corsair drives use hardware encryption, so a physical recovery only yields readable data when the correct credentials are supplied — have them ready.
My Corsair drive isn't recognized — is the data still there?+
Usually. A drive that isn't detected most often has a controller, firmware, or mechanical fault while the data itself sits intact. Stop using it, don't reformat, and let our cleanroom recover it.
Do I have to visit a location?+
No. We're a mail-in service: confirm online, we email a free prepaid label, you ship your Corsair device, and we return it with your recovered data. You only pay on success.